Mounting Google Drive accounts as network drives

Easy-to-use Google Drive integration for Linux using rclone

2020-10-15 linux workflow google

When sharing files, I use three main services. I use Firefox Send and KeybaseFS to share one-off and large files with friends, and I use Google Drive to store some personal files, and for everything school-related (I don’t get a choice about this). For the first two services, sharing a file is as simple as calling ffsend or moving a local file into my kbfs mountpoint, and I am done. Google Drive, on the other hand, the process isn’t as easy. While some Linux distributions have Google Drive integration out of the box (I miss daily-driving ChromiumOS), Linux users generally have to go to drive.google.com, and deal with the Google Drive webapp. Not sure if this is an “only me” problem, but whenever I need to quickly make a change to a document through the webapp, It decides to stop working.

I really like the Keybase approach of mounting remote storage as a “network drive” on my laptop, and wanted to do something similar for Google Drive. This is where a great tool called rclone comes in to play. Rclone is a very easy-to-use command-line application for working with cloud storage. I originally learned about it when I used to host this website on DigitalOcean Spaces a few years ago. Out of the box, Rclone supports many cloud providers, including Google Drive!

Setting up Rclone for use with Google Drive

Now for the fun part, to get started with Rclone and Google Drive on your computer, you must first install Rclone. I am going to assume you are using a Linux-based operating system here, but with some slight tweaking, this works on BSD and Windows too!

# Install Rclone with the automated installer
curl https://rclone.org/install.sh | sudo bash

Once Rclone is installed, you need to hop on over to the Google Cloud Developer Console, and create a new project. Under the ENABLE APIS AND SERVICES section, search for, and enable the Google Drive API. This will expose an API to your Google Drive, and let programs interact with the files (if setting up multiple accounts, you only need to enable the API on one of them). Click the Credentials tab in the left-side panel, then Create credentials. This will open a panel letting you set up access to your new API.

With the panel open, click CONFIGURE CONSENT SCREEN, External, then CREATE. Enter rclone as the application name, and save it. You now have set up one of those “sign in with Google” screens for yourself. Clicking the Credentials tab again will bring you to an area where you can generate the needed API keys for Rclone.

Click + CREATE CREDENTIALS at the top of the panel, and select OAuth client ID. Set the application type to Desktop app, and finally, press Create. You will now be shown the needed info to link Rclone to your account(s).

Note: This API project is not verified by Google.
This means that you will be greeted with a scary warning when logging in the first time. Just ignore it.

Back in the terminal, we can run rclone config to set up a configuration for Google Drive. You will be prompted with many options. Use the following:

# > rclone config

# Create a new config
n) New remote

# Set a name
name> my_drive

# Choose a storage type
Storage> drive

# You will be asked for a client ID and secret. These are the strings we just generated
...

# Set the scope to allow Rclone access to your files
scope> 1

# Select the default option for everything until asked if you want to use "auto config"
# When asked, say yes
auto_config> y

# Set team drive to no
team_drive> n

# Verify the information, then say yes
ok> y

Almost done. You need to run rclone ls my_drive: (the colon is important). This will probably ask you to go to a link, and enable an API. Do so.

Your Google Drive can now be mounted by running the following (feel free to change the paths to whatever you want)

mkdir -p ~/google_drive
rclone mount my_drive: ~/google_drive --vfs-cache-mode writes

Starting Rclone on boot

You probably don’t want to run an rclone command every time you start your computer. This can be solved in one of two ways

For i3wm users

On i3wm, just add the following line to ~/.config/i3/config:

exec --no-startup-id rclone mount my_drive: /home/<user>/google_drive --vfs-cache-mode writes

Make sure to replace <user> with your username.

Keep in mind, exec commands are not run when reloading i3 with Mod+Shift+r. You must log out (Mod+Shift+e), and back in again.

For Ubuntu / Debian-based users

In pretty much any Debian-based system, you can edit /etc/rc.local (using sudo), and add the following line right before exit 0:

rclone mount my_drive: /home/<user>/google_drive --vfs-cache-mode writes

Make sure to replace <user> with your username.



Thank you for reading this post. If you enjoyed the content, and want to let me know, or want to ask any questions, please contact me via one of the methods listed here. If you would like to be notified about future posts, feel free to load my rss feed into your favorite feed reader, or follow me on Twitter for notifications about my work and future posts.
If you have the time to read some more, I recommend checking out one of the following posts:
Using Bazel to create Minecraft modpacks
I decided to modernize my system for producing builds of my personal Minecraft modpack using the Bazel buildsystem.
Reading metadata from a bitmap file
Inspired from one of my friend's projects, I built a small tool for displaying bitmap file info from the command line.
My workflow: video conference edition
As my courses have moved mostly online, I have looked to improve my live video setup. This post covers how I stream sharp HD video at home, and some interesting quirks of the setup.


Made with ♥ by Evan Pratten | RSS | API Status